If your Bissell ProHeat 2X Revolution Pet Turbo (model 35799) isn’t spraying water or cleaning solution, it can hinder your cleaning efforts. This guide offers clear, safe steps to diagnose and fix the issue, ensuring your carpet cleaner operates smoothly again.
Follow these troubleshooting steps carefully, and always prioritize safety when working with electrical appliances and cleaning solutions.
Key Takeaways
| Check water tank | Ensure the water and solution tank is filled and seated properly. |
| Inspect nozzles | Clogged nozzles can prevent spraying; cleaning them can resolve the issue. |
| Examine filters | Dirty or clogged filters restrict water flow; cleaning or replacing them helps. |
| Look at the pump | A malfunctioning pump can stop spray; testing or repairing it is necessary. |
| Check for blockages | Clear any debris or blockages in hoses or spray pathways. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
- Powerful Suction: 40% more suction with TurboStrength motor
- Quiet Operation: 50% noise reduction for quieter cleaning
- Max Clean Mode: Removes dirt, stains, and allergens
As an affiliate, we earn on qualifying purchases.
Step 1: Verify Water and Solution Tanks
- Turn off and unplug your Bissell cleaner.
- Remove the water and cleaning solution tanks carefully.
- Check that the tanks are filled with water and solution as needed.
- Ensure the tanks are seated properly back into the unit.
Step 2: Clear Clogs from Nozzles and Spray Pathways
- Locate the spray nozzles at the front of the cleaner.
- Use a small brush or toothpick to gently remove any debris or dried solution blocking the nozzles.
- Run water through the nozzles to flush out remaining clogs.
Step 3: Inspect and Clean Filters
- Access the filter compartment (usually near the water tank or behind panels).
- Remove filters and rinse them with warm water.
- Allow filters to dry completely before reinserting.
Step 4: Test the Pump and Hoses
Listen for the pump’s operation when you turn on the cleaner. If it remains silent or sounds strained, it may need repair.
Check hoses for kinks, blockages, or damage. Clear or replace as necessary.
Additional Tips & Safety Precautions
- Always unplug the machine before performing maintenance.
- Use only recommended cleaning solutions, such as the BISSELL Multi-Surface Solution.
- If cleaning nozzles or filters doesn’t fix the issue, consult a professional repair service.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: 18 lbs
- ✔ Cord Length: 25 ft
- ✔ Tank Capacity: 1.25 liters
JORAIR Brush Replacement Compatible
- ✔ Weight: 1.2 lbs
- ✔ Shelf Life: 6 months
- ✔ Usage: Multiple cleanings
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo (35799) offers impressive suction and noise reduction features, making it ideal for deep cleaning. If it’s not spraying, common causes include clogs or tank issues, which are straightforward to fix.
Pros:
- High suction power
- Quiet operation
- Effective pet stain removal
- Fast drying modes
Cons:
- Clogging can occur
- Requires regular filter maintenance
- Nozzle blockages possible
Best for: Deep cleaning heavily soiled carpets and pet stains
Not ideal for: For very lightweight or occasional use
Bottom line: A reliable, powerful cleaner with troubleshooting options for non-spraying issues.
JORAIR Brush Replacement Compatible
Replacing worn or clogged brushes and filters can restore spray performance and overall cleaning effectiveness of your Bissell crosswave or similar models.
Pros:
- Easy to install
- Compatible with multiple models
- Affordable pack of replacements
- Enhances cleaning efficiency
Cons:
- Only compatible with certain models
- Requires periodic replacement
- Does not fix internal pump issues
Best for: Maintaining optimal spray and cleaning performance
Not ideal for: If the spray blockages are caused by internal pump failure
Bottom line: A cost-effective way to keep your cleaning system working at peak performance.
Frequently Asked Questions
Why is my Bissell carpet cleaner not spraying water?
Common causes include clogged nozzles, dirty filters, insufficient water in the tank, or a faulty pump. Follow the troubleshooting steps to identify and fix the issue.
How do I clear a clogged spray nozzle?
Remove the nozzle and use a small brush or toothpick to gently clear any debris. Rinse with warm water to ensure it’s free of blockages.
Can I use any cleaning solution in my Bissell cleaner?
It’s best to use BISSELL Multi-Surface Solution or other recommended formulas to prevent damage and ensure optimal cleaning performance.
What should I do if cleaning nozzles are clear but it still won’t spray?
Check the water tank for proper seating, inspect the pump for damage, and consider replacing filters or consulting a repair technician if needed.
Keep Your Carpet Cleaner Running Smoothly
Regular maintenance and prompt troubleshooting can resolve most issues with your Bissell ProHeat 2X Revolution Pet Turbo. By following these steps, you ensure your carpet cleaner stays effective and ready for your next deep clean. Always prioritize safety and use genuine parts for repairs to prolong your machine’s lifespan.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
