Maintaining your Bissell CrossWave is essential for keeping it functioning properly and extending its lifespan. Proper cleaning removes dirt, hair, and debris that can clog or damage the machine. This guide provides clear, step-by-step instructions to clean your Bissell CrossWave thoroughly and safely.
Follow these steps regularly, especially after heavy use or cleaning pet messes, to ensure your machine continues to deliver top performance.
Key Takeaways
| Regular Maintenance | Clean your CrossWave after each use for optimal performance. |
| Use Proper Solutions | Always use the recommended Bissell multi-surface solution. |
| Check and Replace Parts | Inspect and replace brush rolls and filters periodically. |
| Avoid Water Damage | Never immerse the entire machine in water. |
| Keep Moving Parts Clear | Remove hair and debris from the brush and suction pathways. |
BISSELL TurboClean, Upright Carpet Cleaner, Pro Max Clean & Protect + Oxy Urine Eliminator Formula Included, 3952
- Supports Pet Foundation: Every purchase helps save pets
- Outperforms Lightweight Cleaners: Handles tough pet and everyday messes
- DeepReach PowerBrush: Removes ground-in dirt and stains
As an affiliate, we earn on qualifying purchases.
Unplug and Prepare Your CrossWave
- Ensure the machine is turned off and unplugged from the power outlet.
- Remove the brush roll by unlocking the access panel, following your user manual’s instructions.
Empty and Rinse the Water Tank
- Lift out the clean water tank and empty any remaining solution or debris.
- Rinse the tank thoroughly with warm water to remove dirt and residue.
Clean the Brush Roll and Suction Pathways
- Remove the brush roll and inspect for hair, fibers, or debris. Use scissors or a cleaning brush to clear obstructions.
- Rinse the brush roll under warm water; avoid using harsh chemicals.
- Check the suction pathways for blockages and clear them if needed.
Clean Filters and Replace if Necessary
- Remove the filters and rinse with water if washable, or replace them if worn out or dirty.
- Allow filters to dry completely before reinstalling.
Reassemble and Test the Machine
Reinstall the brush roll, filters, and water tank. Plug in the machine and run a short cleaning cycle with plain water to ensure everything works smoothly.
The Products in This Guide
BISSELL TurboClean
- ✔ Capacity: 0.75 gallons
- ✔ Power: 6.0 amps
- ✔ Warranty: 2 years
JORAIR Brush Replacement Compatible
- ✔ Package weight: 1.2 pounds
- ✔ Material: Plastic and synthetic fibers
- ✔ Warranty: N/A
BISSELL TurboClean
The BISSELL TurboClean offers powerful cleaning with a 4-row DeepReach PowerBrush and lightweight design, making it ideal for tackling pet messes in small spaces. Its Pro Max Clean & Protect formula helps prevent future stains.
Pros:
- Powerful DeepReach PowerBrush
- Lightweight & compact
- Includes stain-protect formula
- Effective on carpets & rugs
Cons:
- May require frequent filter cleaning
- Limited to small spaces
- Brush roll may need replacement over time
Best for: Cleaning pet stains and ground-in dirt in small areas
Not ideal for: Large-area cleaning or heavy-duty commercial use
Bottom line: A lightweight, pet-friendly carpet cleaner ideal for small spaces.
JORAIR Brush Replacement Compatible
This compatible set with Bissell CrossWave ensures your machine maintains peak performance by replacing worn brushes and filters effectively.
Pros:
- Affordable 3-pack brush rolls
- Includes filters and cleaning brush
- Easy to install
Cons:
- Only compatible with specific CrossWave models
- Brush size limited to 9.84 inches
- Filters may need frequent replacement
Best for: Maintaining optimal cleaning efficiency
Not ideal for: Non-compatible models or full machine overhaul
Bottom line: A cost-effective way to keep your CrossWave running smoothly.
Frequently Asked Questions
Can I use regular water to clean my Bissell CrossWave?
Yes, you can use plain water for regular cleaning. However, using Bissell multi-surface solution enhances cleaning performance and helps prevent odors.
How often should I clean or replace the filters?
Inspect filters regularly; wash washable filters every 1-2 months, and replace non-washable filters every 3-6 months based on usage.
Is it safe to immerse parts of the CrossWave in water?
Only removable parts like the water tank, brush roll, and filters should be rinsed with water. Never immerse the main body of the machine.
What should I do if my CrossWave leaves streaks or isn’t cleaning well?
Ensure the brush roll and filters are clean and properly installed. Check for blockages and use fresh solution. Replacing worn brushes can also improve cleaning.
Keep Your CrossWave in Top Shape
Regular cleaning and maintenance of your Bissell CrossWave will ensure it performs at its best for years to come. Follow these simple steps, use quality solutions, and replace parts as needed to keep your floors spotless and extend the life of your machine.
With proper care, your CrossWave will continue to provide effective cleaning, making your home healthier and more comfortable.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
